Product Details
Smart Single Phase H40 Power Saver

General Parameters of Jumbo energy  reducer:

Working Temperature:-40° to +70°
IP Level:IP43
Panel Designed:Stainless Steel
LCD Display:Power Factor/Current/Voltage/Saving Percentage Of Amp
LED Display:Compensation Working Status
Software:Micro Intelligent Inspection&Compensation
Power Compensation Status:64Kinds
Control Method:RTOS Embedded
Controller:High-Tech Software Controlled
Related Technology:VFD/PID Controlling
CT Outside:Choice from customer
Size:250mm x230mm x92mm
Amp Saving Rate:10% to 40%

Input Voltage:Single Phase/AC/90V-265V/50HZ/60HZ

Suitable Working Range In Amp:25Amp-80Amp


Gross Weight:4-5.5KG

Advantages of energy saver newest

1.Automatically  monitor the load by current sensor
2.Intelligent compensation according to the needs of the electricity system
3.Exclusive smart software.
4.LCD display to show the U/I/PF/S.
5.Over current/voltage/temperature  protection mode.
6.CT installation without needing any  orientation.
Household, shops, restaurants, schools, suitable working range in single phase.

Wiring diagram of industrial power saver:

Installation instruction of 380V reactive power bill saving
1.Switch the breaker “a” and”b” “off”, then connect the live wires ,neutral wire, earth wire after the
2.Please turn the breaker ”a” and “b” “on” and the switcher of the power saver “on”, then check
whether the LCD displaying is lighting and showing the U/I/S correctly.Then check whether the first
LED lamp is lighting? If yes, means the “power in” is normal.
3. If all the data is displaying right, then please turn the breaker “a”,”b” and the switcher of the power
saver off.
4.Then insert the CTs well according to the diagram. It must be hanged before the main breaker”a”.
5.After connection of CTs,please turn on all the breaker and switcher. Let the power saver start